Pole Barn & Detached Building Wiring
Power, lighting, and outlets for pole buildings, detached garages, sheds, and workshops, wired for homeowners in Milford, DE and surrounding communities.
Licensed • Insured • Locally Owned
How We Approach It
Plan for What the Building Will Do
A shed that needs one light and an outlet is a different job from a workshop running a heater and power tools all winter. We size the feeder, subpanel, and circuits around how the building will be used, with room for what you may add later. That covers underground feeders, subpanels, lighting, outlets, equipment circuits, and exterior power. For buildings used by a business, see Commercial Electrical.
Why It Matters
What Changes Once the Power Is In
A well-planned install turns a detached building into space you can actually use.
01
A barn or garage you can work in after dark
02
Power for tools and equipment without overloading a circuit
03
Outlets placed along the walls and benches where you work
04
No more extension cords run across the yard from the house
05
Capacity to add a heater or new equipment later
06
A clean, organized install with clearly labeled circuits
Testimonials
Customer Feedback on Recent Projects
Google reviews from homeowners across Kent and Sussex Counties.
Zach has done a lot of electrical work for us over the past few years, including installing an electric heater in our garage, wiring for our pool pump, running electricity to our shed, installing a 50-amp RV outlet,…
Owner reply
Wayne, thanks for the years of trust with all those projects, from the pool pump wiring to the new subpanel and…
Wayne Baker
2026-09-18
Very pleased. Quick response to my email and followed up by text. I was able to confirm his Master Electrician license on the state’s website. Arrived on time and went straight to work. Reviewed the electrical panel and…
Owner reply
We appreciate you trusting us with your home, and it’s good to hear the communication and care for your property stood…
KandE Traveling
2026-10-19
Zach was extremely knowledgeable, experienced and considerate. Very accommodating and fast! Highly recommended anyone and everyone to call him with all your electrical needs! I had a Tesla port installed and couldn’t be…
Owner reply
Amanda, glad you’re enjoying your new Tesla charger! It was a pleasure helping you get set up for charging at home, and…
Amanda Leeuwen
2026-10-17
Zach installed a picture light over a painting in our home and it looks great! He was professional, personable and offered several options that could meet our needs. He cleaned up after completing the job and was…
Owner reply
Desda, thank you for the glowing review! We’re happy Zach helped you find the right lighting option for your painting…
Desda Moss
2026-10-01
Very professional, great prices and amazing customer service!
Owner reply
Brittany, thank you for the great review! We’re glad you were happy with our pricing and customer service. We…
Brittany Badger
2026-09-22
Zach did a bunch of work around our older home, updating it and improving the safety. We’re grateful for his honest and educational expertise. We will definitely use MEGA Electrical Services again for any other…
Owner reply
Micayla, we really appreciate your thoughtful review! It’s great to hear that Zach helped make the updates to your home…
Micayla Raffaele
2026-09-18
How It Works
From Bare Building to Powered Up
Here's how an outbuilding project comes together.
Step 1
Tell Us About the Building
Share its size and the tools or equipment you plan to run.
Step 2
Site Visit & Plan
We look at the building, its distance from the house, and your existing panel, then put together a plan and an estimate.
Step 3
Install & Power Up
We complete the wiring, test every circuit, and show you where everything is.
FAQs
Pole Barn & Outbuilding Wiring Questions
Answers to common questions about powering a barn, garage, or shed.
Q1
How do you get power to a detached building?
Q1
How do you get power to a detached building?
Most detached buildings are fed by a cable run from the home's panel, usually underground, to a subpanel or disconnect in the new building. The route and size depend on the distance and what the building needs to power.
Q2
Does my pole barn or garage need its own subpanel?
Q2
Does my pole barn or garage need its own subpanel?
Often, yes. A subpanel gives the building several circuits for lights, outlets, and equipment, with breakers you can reach on site. A small shed with one light and an outlet may only need a single circuit.
Q3
Can my home's panel handle a new outbuilding?
Q3
Can my home's panel handle a new outbuilding?
It depends on the panel's capacity and open space, which we check during the site visit. If it's full or undersized, our Panel & Service Upgrades page covers the options.
Q4
Can you install a 50-amp RV outlet?
Q4
Can you install a 50-amp RV outlet?
Yes. A 50-amp RV outlet can go on a garage, barn, or a spot near where you park, wired on a circuit matched to your RV's power needs.
Q5
Can you wire a heater in a garage or workshop?
Q5
Can you wire a heater in a garage or workshop?
Yes. Electric heaters usually need a dedicated circuit based on the unit's rating, which we plan along with the building's other circuits.
Q6
What kind of lighting works best in a pole barn?
Q6
What kind of lighting works best in a pole barn?
LED shop fixtures give bright, even light across a large open space, and exterior lights over doors make it easy to come and go at night. Motion or dusk-to-dawn controls can be added to outside fixtures.
Q1
How do you get power to a detached building?
Q1
How do you get power to a detached building?
Most detached buildings are fed by a cable run from the home's panel, usually underground, to a subpanel or disconnect in the new building. The route and size depend on the distance and what the building needs to power.
Q3
Can my home's panel handle a new outbuilding?
Q3
Can my home's panel handle a new outbuilding?
It depends on the panel's capacity and open space, which we check during the site visit. If it's full or undersized, our Panel & Service Upgrades page covers the options.
Q5
Can you wire a heater in a garage or workshop?
Q5
Can you wire a heater in a garage or workshop?
Yes. Electric heaters usually need a dedicated circuit based on the unit's rating, which we plan along with the building's other circuits.
Q2
Does my pole barn or garage need its own subpanel?
Q2
Does my pole barn or garage need its own subpanel?
Often, yes. A subpanel gives the building several circuits for lights, outlets, and equipment, with breakers you can reach on site. A small shed with one light and an outlet may only need a single circuit.
Q4
Can you install a 50-amp RV outlet?
Q4
Can you install a 50-amp RV outlet?
Yes. A 50-amp RV outlet can go on a garage, barn, or a spot near where you park, wired on a circuit matched to your RV's power needs.
Q6
What kind of lighting works best in a pole barn?
Q6
What kind of lighting works best in a pole barn?
LED shop fixtures give bright, even light across a large open space, and exterior lights over doors make it easy to come and go at night. Motion or dusk-to-dawn controls can be added to outside fixtures.
Get Your Outbuilding Wired
Send us the details, and we'll come take a look at the building.
MEGA Electrical Services provides electrical installation, repair, and troubleshooting for homes and businesses throughout Milford, DE and the surrounding Kent and Sussex County area.
© 2026 MEGA Electrical Services. All rights reserved.
